Products: 4567, 4568, 4565, 5656, 4566, 5948
Learn how to sublimate license plates, frames, and strips. Attach them to a car, tailor, or golf cart!
These products are made from aluminum and are one-sided. If you are searching for product templates, graphics, or other assets click here.
What You Need
- Blank Unisub license plate / frame / strips
- Transfer(s) from your sublimation printer
- Heat Tape
- Scissors
- Clean, lint free cloth
- Heat resistant gloves
- Protective paper (Blow Out Paper)
- Heat press set to 385°F / 195°C
instructions
Step 1. Get Your Heat Press Ready
Turn on your heat press. We recommend pressing all of our products at 385°F / 195°C. Be sure to lay a piece of protective paper on the bottom of the press.
Step 2. Prep Your License Plate
Remove any film that may be on the surface of the license plate. Clean off the surface of the license plate with a cleaning cloth, all-purpose cleaner, or a can of compressed air.
Step 3. Pair the Transfer with the License Plate
Lay the transfer down on a flat surface with the printed image facing up. Place the white side of your license plate on top of the transfer and line it up. Tape the license plate to the transfer paper with heat-safe tape.
Note: All plates, frames, and strips require the same directions for sublimation.
Step 4. Let’s Sublimate!
Place the transfer and license plate into the heat press with the transfer on top. Lay another piece of protective paper on top of the license plate. Confirm that the heat press is at the correct temperature. Pressing times are below.
License plate frame strips: 60 – 75 seconds
License plate: 75 – 80 seconds
License plate frames: 65 – 75 seconds
Mini license plate: 65 – 70 seconds
Step 5. Remove the License Plate from the Heat Press
Once the timer is done use heat-protective gloves to remove the license plate from the press. Let cool.
Enjoy your new license plate or license plate frame!
