Products: 5646, 5767
Learn how to sublimate Unisub bookmarks! Bookmarks make a great practical gift for kids and adults.
Our bookmarks are made out of aluminum and are one-sided. If you are searching for bookmark templates, graphics, or other assets click here.
What You Need
- Blank Unisub bookmark
- Transfer(s) from your sublimation printer
- Heat Tape
- Scissors
- Clean, lint free cloth
- Heat resistant gloves
- Protective paper (Blow Out Paper)
- Heat press set to 385°F / 195°C
instructions
Step 1. Get Your Heat Press Ready
Turn on your heat press. We recommend pressing all of our products at 385°F / 195°C. Be sure to lay a piece of protective paper on the bottom of the press.
Step 2. Prep Your Bookmark
Remove any film that may be on the surface of the bookmark. Clean off the bookmark with a cleaning cloth, all purpose cleaner, or a can of compressed air.
Step 3. Pair the Transfer With the Bookmark
Lay the transfer down on a flat surface with the printed image facing up. Place the white side of your bookmark face down, on top of the transfer, and line it up. Take two pieces of heat tape and secure the bookmark to the transfer.
Step 4. Let’s sublimate!
Place the transfer and bookmark into the heat press with the transfer on top. Lay another piece of protective paper on top. Confirm that the heat press is at the correct temperature. Pressing times are below.
Aluminum Bookmark: 40 – 50 seconds
Step 5. Remove Bookmark from the Heat Press
Once the timer is done use heat-protective gloves to remove the ornament from the press. Let cool.
Enjoy your new bookmark!
